How to determine if my PC power supply is broken? - diego motherboard specifications
Take a couple began to press the power button to start the computer, usually only a flash of light before dying. Now I've got, I even suggested that it is the power source, apart from the fact that the motherboard, because the LED is on the motherboard not yet been completed. Any contribution is welcome.
Components:
ASUS A8N-SLI Deluxe, AMD Athlon 64 4000 + San Diego CPU APEVIA ATX-AS520W-BK 520W ATX Power Supply
Wednesday, January 27, 2010
Diego Motherboard Specifications How To Determine If My PC Power Supply Is Broken?
3 comments:
http://pinouts.ru/Power/atxpower_pinout. ...
http://pinouts.ru/Power/atx_v2_pinout.sh ...
The first is for 20-pin connector, the second for the 24-pin connector. (I connect my) on the motherboard. Remove them and use a piece of wire (CLIP) short stalk # 14 (20-pin) / # 16 (24-pin) to the nearest door (# 13 or # 15 / # 15 or # 17) or better color : green, black! In order to begin the PS) (do you miss the board from the circuit and you can see / hear the hard drive (s) and if it should be like a spinning disc into the CD-ROM or DVD too heavy for only a few seconds . You can also eject / load the tray of the optical drive. PS, if it this way for some examples (10) working minutes, I think we can say, OK, and motherboard dead.
Otherwise, if you do not start or starts and stops after a few seconds one after removing the floppy / DVD / CD-ROM / HD Molex connectors the unit is defective or attached to n 'There's nothing more to the PS. Exception in this case does not start (fan sEBE merilly anti-spin), you can throw in the trash and replace it with a new ... it is cheaper than repair.
Did you kill a power supply and most likely more of them, the importance of memory and the motherboard proposed at this time, the earliest
Also check the power switch, which could be faulty. You can omit the function option by shorting the pins where the son of the power cord plug
Before the declaration of the motherboard as "dead" are trying to separate him from his horse, he moved w / out touching anything, in this case. It can be a part of the motherboard is based w / case and that is a constraint set for a voltage rail. The power is automatically turned off if there is an overload.
+5 V SB is always on when the power cord is plugged in. The LED can get from where their power.
Post a Comment